User Manual

RF-Baton! Transmitter Controller Installation and Operation Contents
June 1999 6880497G01-B xxiii
Trace Mode, 5-15
Test Data Mode, 5-16
GPS Receiver FIPS Commands, 5-21
OncoreVP GPS Configuration, 5-21
GPS Values, 5-22
GPS Health and Status, 5-24
Alarm and Error Logs, 5-27
Station Alarm Log, 5-27
Station Error Log, 5-28
Software Error Log, 5-29
Log Initialization, 5-30
Maintenance, 6-1
Troubleshooting, 6-1
Front Panel Indications, 6-1
RF-B! Transmitter Controller Status, 6-3
Bad DRAM or Flash SIMM, 6-5
No 1PPS Synchronization and the GPS Lock Light Is On, 6-7
Data Path Diagnostics, 6-10
Verify the RF-B! Transmitter Controller Network Connection, 6-10
Verify RF-B! Transmitter Controller Receipt of Message Data, 6-12
Verify RF-B! Transmitter Controller Paging Is Enabled, 6-16
Verify Launch Time Calculation and Processing, 6-18
Verify Proper Control Message Output, 6-21
Verify Data to Transmitter, 6-23
GPS Diagnostics, 6-24
S_GPS_IS_DISABLED, 6-25
<E_GPS_SELF_TEST_FAILED>, 6-26
<E_GPS_NOT_TRACKING_SATELLITES>, 6-27
<E_SASM_FREERUN_TIMEOUT>, 6-30
Removal and Installation, 6-31
Cabinet Doors, 6-31
RF-B! Transmitter Controller, 6-33
RF-B! Transmitter Controller Faceplate, 6-35
DC-DC Converter, 6-36
Baton Control Module, 6-37
Reference Module, 6-37
6-Hour Battery, 6-38
Assigning an RF-B! Transmitter Controller to a Multicast Group, 6-43
Multicast Direct Write Mode, 6-44