User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
June 1999 6880497G01-B E-13
RF-Baton! Transmitter Controller Installation and Operation Traces
June 1999 6880497G01-B E-13
SASM 0x00000004 4 SASM Task 1-PPS Trace
Displays the status of the 1-PPS pulse
as seen by the SASM task.
1PPS occured : 1 = good/ 0 = bad
Means the 1-PPS actually occured.
1PPS within_window - 1 = good/ 0 =
bad. Means the 1-PPS was within the
launch window as defined by parameter
902:
0 = N/A
1 = 0.480 uS
2 = 0.950 uS
3 = 1.900 uS
4 = 3.810 uS
5 = 7.600 uS
NOTE: The Baton! should
ALWAYS
be
set for 7.600uS
SASM Pulse: State: <4> PAGING_WITH_GPS, 1PPS occured: 1,
1PPS within window:
SASM 0x00000008 8 SASM Task Tracking Trace—displays
the fact that SASM has been notified by
GPS that it is tracking satellites.
GPS SATELLITE TRACKING
TASK MASK
FLAG
(dec)
DESCRIPTION EXAMPLE OUTPUT