User Manual

E-11 6880497G01-B June 1999
Traces RF-Baton! Transmitter Controller Installation and Operation
E-11 6880497G01-B June 1999
PCLM 0x00000001 1 PCLM Task PnP Control Command
Trace—displays the PnP control
command logic and the contents of the 3
pieces of data [0, 1, 2] sent.
==paging just enabled OR batch NOT contiguous
new ctl cmd -
[0]:5f5e10 - next PDM launch time in 10s of microseconds
[1]:0
[2]:80000001
| | | | | - defines modulation mode for each
| subchannel. 1 = FM, 2 = AM. Ch 1 = LSB
| -- always ‘8’
PCLM 0x00000004 4 PCLM Task Logic Trace—displays key
PCLM logic algorithms.
For development use only.
No use to the customer.
No output
PCLM 0x00000002 2 PCLM Task Link List Delay Trace—
displays the time until the next frame
launch. Data is calculated from the time
difference between the present frame
and the next one on the linked list. Time
is X10ms
Calc’d launch dly:186
ex: 186 X 10ms = 1860ms = 1.86 seconds
PCRM 0x00000002 2 PCRM Task Status Trace—paging
status trace
- Notifies the user of the paging Enable
or Disable status of the Baton! Executes
each time
a PDM is successfully received.
Paging is Disabled!
TASK MASK
FLAG
(dec)
DESCRIPTION EXAMPLE OUTPUT