User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
E-6 6880497G01-B June 1999
Traces RF-Baton! Transmitter Controller Installation and Operation
E-6 6880497G01-B June 1999
GPSC 0x00001000 4096 GPS Task Re-Init Command—from the
POSITION HOLD state, if this flag is set,
the GPS state machine re-initializes
itself back to the first state of the state
machine.
For development use only.
No use to the customer.
.
.
.
GPS STATE SOLVE_FOR_LOCATION
GPS STATE SOLVE_FOR_LOCATION
GPS STATE SOLVE_FOR_LOCATION
GPS STATE SET_FINAL_SATELLITE_MASK_ANGLE
GPS STATE SET_POSITION_HOLD_STAGETM 6:50
GPS STATE START_OF_INIT
GPS STATE VERIFY_SOFTWARE_REVISION
GPS software version 8 revision 4
GPS STATE EXECUTE_SELF_TEST
GPS STATE SET_POS_FIX_TYPE
GPS STATE SET_FIX_MODE
.
.
TASK MASK
FLAG
(dec)
DESCRIPTION EXAMPLE OUTPUT