User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
June 1999 6880497G01-B E-5
RF-Baton! Transmitter Controller Installation and Operation Traces
June 1999 6880497G01-B E-5
GPSC 0x00000080 128 Gps Set Defaults Command—sets the
GPS receiver to factory defaults.
NOTE:
1. Factory defaults is NOT a valid Paging
mode. That is, if defaults are set, a
Power OFF Reset must be done to re-
establish paging capable parameters.
The next GPS acquisition will take a long
time because the GPS almanacs must
be rebuilt.
2. This command only applies to
Motorola GPS receivers.
.
.
.
GPS STATE SOLVE_FOR_LOCATION
GPS STATE SOLVE_FOR_LOCATION
GPS STATE SET_FINAL_SATELLITE_MASK_ANGLE
GPS STATE SET_POSITION_HOLD_STAGE
GPS STATE INIT_COMPLETE
Initializing GPS Receiver
GPSC 0x00000010
(16 dec)
16 GPS Task Location Trace—displays
the latitude, longitude, and height
parameters after GPS lock has
occurred.
nv_lat 118234087 nv_lon -350254784 nv_hgt 28758
rt_lat 23646800 rt_lon -70050951 rt_hgt 5802
TASK MASK
FLAG
(dec)
DESCRIPTION EXAMPLE OUTPUT