User Manual

June 1999 6880497G01-B E-3
RF-Baton! Transmitter Controller Installation and Operation Traces
June 1999 6880497G01-B E-3
ATR1 0x00000010 16 Verbose Training Output Trace—Full
details of the resulting response from the
DSP.
Contains response portion of verbose trace
DRT1 0x00000001 1 DRTR Task Output Trace—details the
output metrics of the PnP bus data in
terms of how many PnP increments
were sent and how much time it took.
Also, details which RF-O! paging station
modulator gets the data.
DRTR1: inc=9 delta=9 mod=0 id=812BC04
| | | | |-- pSOS Buffer ID
| | | |--- RFO Modulator (0 - 3)
| | |--- Time taken to send data (X10ms)
| |--- # PnP increments transmitted
|--- Which DRTR task sent data (DRT1, 2, 3, 4)
Each DRTR task represents a ‘subchannel’ of data
GPSC 0x00000001 1 GPS Task Timestamp Trace—valid
during GPS initialization and during
normal GPS operation (while paging). At
initialization time (1), shows the
timestamping logic execution. During
normal operation (2), shows each time
pSOS is set to GPS time.
psos = 16: 1:15: 49
1. GRCM: First time thru, forcing psos time to gps ...
2. Set pSOS time to GPS time - gps = 16: 1:15: 50 - 49
GPSC 0x00000004 4 GPS Task Queue Message Trace—
shows GPS message pSOS ID.
Used for internal development only.
No use to the customer.
grcm q_msg= 129
grcm q_msg= 129
TASK MASK
FLAG
(dec)
DESCRIPTION EXAMPLE OUTPUT