User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Alarms and Error Messages
June 1999 6880497G01-B D-9
Table D-7: Alarms
Reported In
Error Code Description
Error
Log
SW
Log
✓ RSR_DOUBLE_FAULT_MON_RESET Issued upon internal bus error
✓ RSR_EXTERNAL_TOTAL_SYSTEM_RESET Issued upon hard reset (front panel reset button)
✓ RSR_LOSS_OF_CLOCK_RESET Issued upon failure of central processing
Unit (CPU) clock
✓ RSR_POWER_UP_RESET Issued upon power-on reset.
✓ RSR_SOFT_RESET_PIN_RESET Internal only, soft reset.
✓ RSR_SOFTWARE_RESET Issued upon software reset (FIPS: a 117)
✓ RSR_SOFTWARE_WATCHDOG_RESET Issued upon reset caused by watchdog timer
expiration
✓ S_GPS_IS_DISABLED Issued when GPS access is disabled through
FIPS by the user. GPS is disabled through
parameter 99 in the parameter database.
✓ S_GPS_RESOLVED_LOCATION Issued upon successful initialization of the GPS
receiver.
✓ S_PAGING_IS_DISABLED Caused by distribution link failure, high stability
reference failure, GPS receiver out of lock, GPS
receiver failure, TX_OK line fail.
NOTE: TX_OK line is asserted by the Orchestra
Control Module (OCM), until one of the following
occurs on the OCM: synthesizer out of lock,
SASM failure, or module reset.