User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Alarms and Error Messages RF-Baton! Transmitter Controller Installation and Operation
D-8 6880497G01-B June 1999
E_SRAM_READ_FAULT Attempt to read from static random access memory (SRAM)
failed.
E_SRAM_WRITE_FAULT Attempt to write to SRAM failed.
E_SWITCH_DEFAULT The value passed to a conditional switch statement did not
match any of the tested values.
E_UNABLE_TO_START_TASKS An attempt to start one of the station tasks has failed.
E_UNEXPECTED_ELSE The code took an undesired branch in a conditional statement.
E_UNEXPECTED_IPS_COMMAND An unrecognized UHSO alignment command was received.
E_UNEXPECTED_OPCODE A command passed to a task was not recognized by that task.
E_UNEXPECTED_TERMINATION Expecting UHSO warm-up timer to go off, but instead, wrong
timer name is passed.
E_VARIABLE_OUT_OF_RANGE Variable passed to a routine was outside its allowed limits.
Table D-6: OPP Errors
Error Code Description
E_ADD_MEMBERSHIP_FAILED Multicast membership add failed.
E_DROP_MEMBERSHIP_FAILED Multicast membership drop failed.
E_OPP_ASN1_DECODE Error in decoding a User Datagram Protocol (UDP) packet.
E_OPP_ASN1_INIT Initialization of the ASN.1 decoder fails.
E_OPP_BIND Error in binding the UDP socket to an address or port number.
E_OPP_INVALID_PARAMETER_ID Invalid parameter ID returned on update.
E_OPP_IOCTL The UDP link has an I/O error.
E_OPP_PSDOWN The UDP link is inactive and can not be used.
E_OPP_RECVFROM Error in receiving a UDP packet from the socket.
E_OPP_SELECT Error waiting for input on UDP socket.
E_OPP_SOCKET Error in creating UDP socket.
Table D-5: Software Errors (Sheet 2 of 2)
Error Code Description