User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Alarms and Error Messages
June 1999 6880497G01-B D-7
E_UNIMPL Unemployments system service.
E_UNITSIZE Cannot create—unit size not power of 2 or less than 4.
E_UNMAPPED Logical address is not mapped.
E_ZERO Cannot getseg—requested size is zero.
E_ZEROMAP Zero memory to be mapped.
Table D-5: Software Errors (Sheet 1 of 2)
Error Code Description
E_BAD_IMAGE_CRC An application remote software download attempt failed.
E_BAD_XILINX_PARAMETER Invalid Xilinx type used.
E_CANNOT_FLUSH_QUEUE Failed attempt to flush message queue because maximum
number of messages expected was received.
E_DETERMINE_OBJECT_ID_NOT_FOUND An unrecognized system ID value was used.
E_ILLEGAL_IPS_COMMAND An unrecognized FIPS action command was received.
E_ILLEGAL_PARAMETER_WRITE FIPS user attempted to write to a value that is application read
only.
E_ILLEGAL_PORT_NUMBER An attempt to access an illegal output port has been made.
E_NOT_ENOUGH_MEMORY There was not enough memory to dynamically allocate a buffer.
E_PARAMETER_MANAGER_BAD_STATUS Parameter manager status problem.
E_PARAMETER_WRITE_OUT_OF_RANGE UHSO alignment parameters are invalid.
E_PASSED_PARAMETER_OUT_OF_RANGE A FIPS parameter was out of range.
E_PORT_ACCESS_FAILURE The GPS ASR has been started without a valid Dual Universal
Asynchronous Receiver Transmitter (DUART) port having been
assigned and allocated.
E_SNMP_DECODE_FAILURE Failed decode of received Simple Network Management
Protocol (SNMP) packet.
E_SNMP_SETUP_MIB_FAIL SNMP Management Information Base (MIB) initialization failed.
Table D-4: Operating System Errors (Sheet 4 of 4)
Error Code Description