User Manual

Table Of Contents
RF-Baton! Transmitter Controller Installation and Operation Alarms and Error Messages
June 1999 6880497G01-B D-3
Table D-2: Digital Signal Processor (DSP) Errors
Error Code Description
E_DSP_BOOTSTRAP_TIMEOUT_ERROR Unsuccessful attempt in downloading bootstrap code to the
DSP.
E_DSP_OUTPUT_BUFFER_FULL Only valid during a training request. Training request made, but
there were no DSP message buffers available to receive the
training request.
E_DSP_STARTUP_FAILURE An attempt to download code to one of the DSPs failed.
E_DSP_TIMEOUT_ERROR Unsuccessful attempt to download main application code to the
DSP.
E_DSP_TIMEOUT_ON_OUTPUT The DSP did not respond to a Host request within a designated
time-out period.
Table D-3: GPS Errors
Error Code Description
E_GPS_BAD_COMMAND Bad command received from GPS receiver.
E_BUFFER_LENGTH_EXCEEDED GPS message size has exceeded buffer size.
E_CORRUPTED_GPS_COMMAND_TABLE GPS command table has been corrupted.
E_GPS_NO_RESPONSE GPS receiver does not respond to a Host command within
designated time period
E_GPS_NOT_TRACKING_SATELLITES GPS lost satellite tracking after initialization.
E_GPS_SELF_TEST_FAILURE Self test on GPS receiver failed.
E_GPS_UNSTUFF_PACKET_FAIL Trimble GPS report packet is invalid.