User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
C-22 6880497G01-B June 1999
FIPS Action Commands and Parameter IDs RF-Baton! Transmitter Controller Installation and Operation
C-22 6880497G01-B June 1999
801 FREERUN timeout Length of time in minutes that RF-B!
transmitter controller will remain in
FREERUN state before shutdown.
r 801
w 801 [value]
15 -200 96 N N N
802 SASM warm up
pulses
Number of pulse SASM stays in the
WARM_UP state before transitioning to
PAGING_WITH_GPS state.
r 802
w 802 <value>
0 - 120 40 Y Y N
901 Active FLASH
Bank
Active Software FLASH r 901 1 = Bank A
2 = Bank B
1NNN
930 GPS Access
Disabled
Parameter used to enable or disable
GPS synchronization.
r 930
w 930 [value]
0 = Enabled
1 = Disabled,
when Disabled,
the BCM will
inhibit paging.
0YYN
Table C-2: Supported Parameters
Param
ID
Name Description Usage Range Default
Reset
with
DIP1 &
DIP2
Reset
with
DIP2
No
DIP