User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
C-18 6880497G01-B June 1999
FIPS Action Commands and Parameter IDs RF-Baton! Transmitter Controller Installation and Operation
C-18 6880497G01-B June 1999
195 GPS Longitude Parameter used to set a predetermined
longitude value for use by the GPS
receiver.
r 195
w 195 [value]
–648000000
648000000
-
350254697
YYN
196 GPS Height Parameter used to set a predetermined
height value for use by the GPS
receiver.
r 196
w 196 [value]
–100000
1800000
20533 Y Y N
198 GPS 1 PPS Cable
Delay
Parameter used to offset the 1 PPS
pulse to compensate for antenna cable
delay.
r 198
w 198 [value]
0 - 999,999
(ns)
0YYN
213 MPIF Baud Rate Reads or sets maintenance path baud
rate
r 213
w 213 [value]
1200 = 1,
2400 = 2,
4800 = 3,
9600 = 4,
19.2K = 5,
38K = 6,
57K = 7,
115K = 8,
9600 = 4 Y Y N
Table C-2: Supported Parameters
Param
ID
Name Description Usage Range Default
Reset
with
DIP1 &
DIP2
Reset
with
DIP2
No
DIP