User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
June 1999 6880497G01-B C-13
RF-Baton! Transmitter Controller Installation and Operation FIPS Action Commands and Parameter IDs
June 1999 6880497G01-B C-13
208
cont’d
GPS Report Position
Status
ID: Satellite ID - range from 0 .. 37
Mode: Channel tracking mode - range
from 0 ..8
0 - Code search
1 - Code acquire
2 - AGC set
3 - Freq acquire
4 - Bit sync detected
5 - Message sync detected
6 - Satellite time avail
7 - Ephemeris acquire
8 - Avail for position fix
SS: Signal Strength - range from 0 .. 255
A good signal strength is between
80..140. If Channel mode is 0, signal
strength is meaningless.
Channel Status:
There are 8 bits:
bit 7 (msb): Using for position fix
bit 6 : Satellite momentum alert flag set
bit 5 : Satellite anti spoof flag set
bit 4 : Satellite unhealthy
bit 3: : Satellite inaccurate ( >16 meters)
bit 2,bit 1: Spare
TRIMBLE GPS:
# tracked Satellites
Health of GPS Receiver:
209 GPS Report Satellite
Status
a 209 Motorola: Status and Health
Trimble: # of Visible Satellite List
Table C-1: FIPS Action Commands
Action Name Description Usage Response