User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
June 1999 6880497G01-B C-11
RF-Baton! Transmitter Controller Installation and Operation FIPS Action Commands and Parameter IDs
June 1999 6880497G01-B C-11
207 GPS Report Application
Type
a 207 Motorola: Application Reference:
???????????
Trimble: Application Type:
????????????
208 GPS Report Position
Status
Report time, position, velocity,
geometry, satellite visibility and
tracking status.
a 208 MOTOROLA GPS:
Almanac:
Data transmitted by GPS satellites which
include orbit information on all the
satellites.
Visible Satellites:
Satellites listed in the almanac - range
0..12
Tracked Satellites: - range 0..8 for an 8
Channel receiver Satellites that are good
enough to be used by the GPS receiver to
compute a position fix, which is latitude,
longitude, height, time. Note that we are
talking channel-6 language, so we can
only show up to 6 channels in the FIPS
command.
Table C-1: FIPS Action Commands
Action Name Description Usage Response