User Manual

C-10 6880497G01-B June 1999
FIPS Action Commands and Parameter IDs RF-Baton! Transmitter Controller Installation and Operation
C-10 6880497G01-B June 1999
196 Set Tx Frequencies Set center frequency to one of
16 possible values.
a 196 f
f = 1 - 16
198 Set or Reset OCM
Parameters Writable
Flag
Set or reset the OCM
Parameters Writable Flag on
the RF-O! over the PnP
Maintenance Path.
a 198 Y (Set)
a 198 N (Reset)
Successful or Failed assertion.
200 GPS Report Latitude Report current latitude in ms. a 200 Motorola: Latitude: xxx ms
Trimble: Latitude: xx radians, xx ms
201 GPS Report Longitude Report current longitude in ms. a 201 Motorola: Longitude: xxx ms
Trimble: Longitude: xx radians, xx ms
202 GPS Report Height Report current height in ms. a 202 Motorola: Height: xxx cm (ellipsoid), xx cm
(msl)
Trimble: Height: xx meters, xx cm
203 GPS Report xDOP
Types
a 203 Motorola: xDOP Type= ????
Trimble: Trimble supports.....
204 GPS Report xDOP
Values
a 204 Motorola: xDOP Value: xxx
Trimble: PDOP mask= xxxx
205 GPS Report Height
Reference
a 205 Motorola: ?????? Reference
Trimble: Height Reference: ???????
206 GPS Report Position
Reference
a 206 Motorola: Position Reference:
??????????
Trimble: Position Reference: ??????????
Table C-1: FIPS Action Commands
Action Name Description Usage Response