User Manual

C-8 6880497G01-B June 1999
FIPS Action Commands and Parameter IDs RF-Baton! Transmitter Controller Installation and Operation
C-8 6880497G01-B June 1999
176 Transmit Test Data Start Initiate transmission of canned
data to the OCM.
a 176 m p1 p2 p3 p4 r d s f
m = modulation type
0 = FM
1 = AM;
p1 = subchan 1 pattern
p2 = subchan 2 pattern
p3 = subchan 3 pattern
p4 = subchan 4 pattern
For AM
0 = disabled
2 = random AM data
4 = Random/1 sideband training
5 = Random/2 sidebands training
For FM
0 = disabled
1 = A Pattern
2 = B Pattern
3 = C Pattern
4 = D pattern
5 = Big comma
6 = Little comma
7 = Staircase
8 = random;
r = repetition rate
0 - 128 frames;
d = # of data blocks per frame (n/a
for AM)
1- 11;
s = bit rate of data (n/a for AM)
5 = 6400 bps
4 = 3200 bps
2 = 1600 bps-2 lvl fsk only
f = FSK, 1 = 4-level
0 = 2-level
BCM stops transmission of normal paging
traffic and begins sending data across the
Plug-n-Play interface.
Station begins transmitting data based on
arguments passed to “a 176”.
Table C-1: FIPS Action Commands
Action Name Description Usage Response