User Manual

C-6 6880497G01-B June 1999
FIPS Action Commands and Parameter IDs RF-Baton! Transmitter Controller Installation and Operation
C-6 6880497G01-B June 1999
120 Read bus error Log Display all errors in bus error
log
a 120 All errors which have become active since
last clear-bus error-log command are
displayed.
121 Clear Bus error Log Clear all errors in bus error log a 121 None. Re-reading bus error log will return
no errors
122 Dump Parm DB Prints all parameter data base
‘parameters’ such as name, ID,
type, index, etc. for a given
<type>
a 122 <type>, where <type> =
UINT8, UINT16, UINT32,
SINT8, SINT16, SINT32 and
STRING
Example of a ‘UINT8’ parameter (partial
list shown)
Parameter: P_PPS_WINDOW_SIZE
Id: 902
Index: 18
Type: UINT8
Min: 1
Max: 5
Default: 5
Value: 5
Operator: Check Range/Write
NVM/Read Only/
123 Parm DB Help Prints all parameter data base
indexes and their associated
name for a given <type>
a 123 <type>, where <type> =
UINT8, UINT16, UINT32,
SINT8, SINT16, SINT32 and
STRING
Example of a ‘UINT8’ parameter (partial list
shown)
135 P_PSTN_PASSWORD_VERIFY
139 P_GPS_BAUD_RATE
140 P_FPSP_BAUD_RATE
185 P_PEND_CUSTOMER_WARP
191 P_GPS_MASK_ANGLE_DEGREES
213 P_MPIF_BAUD_RATE
345 P_OPP_GROUP_WRITE_STATUS
346 P_OPP_GROUP_COMMIT
347 P_OPP_GROUP_WRITE_MODE
Table C-1: FIPS Action Commands
Action Name Description Usage Response