User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
June 1999 6880497G01-B C-5
RF-Baton! Transmitter Controller Installation and Operation FIPS Action Commands and Parameter IDs
June 1999 6880497G01-B C-5
117 Reset Station Initiate “warm” reset of station. a 117 <option>, where the
<options> are:
n - Normal Reboot, No Change
to Params
c - Normal Reboot, Error/
Software Logs Cleared, No
Change to Params
d - Software Single Dip2
Reboot, Preserve Site
Dependent/Factory Preset
Params
o - Software Double Dip2
Reboot, Preserve Factory
Preset Params
BCM goes through reset cycle (best
indicated by LED sequence). Upon
resetting, the FIPS Banner is displayed
and the Parameter Database is effected by
the parameter given and is confirmed by
the following
addendum
to the FIPS
banner:
MOTOROLA RF-BATON!
WIRELESS MESSAGING SYSTEM (WMS)
(c) Copyright 1999 Motorola, Inc.
All Rights Reserved.
**** Possible Addendums ****
‘PARAMETER DATABASE UNCHANGED’
‘‘PARAMETER DATABASE UNCHANGED’
“SITE CRITICAL PARAMETERS PRESERVED
--FACTORY PRESETS PRESERVED--
ALL OTHER PARAMETERS SET TO
DEFAULTS”
CRITICAL PARAMETERS SET TO DEFAULTS
--FACTORY PRESETS PRESERVED--
ALL OTHER PARAMETERS SET TO DEFAULT
Table C-1: FIPS Action Commands
Action Name Description Usage Response