User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
C-2 6880497G01-B June 1999
FIPS Action Commands and Parameter IDs RF-Baton! Transmitter Controller Installation and Operation
C-2 6880497G01-B June 1999
Table C-1: FIPS Action Commands
Action Name Description Usage Response
16 GPS Pass Thru
Command
Send command to GPS
receiver.
a 16 [GPS command] GPS receiver reacts to commands.
17 GPS Pass Thru Mode
Start
Put BCM into mode where GPS
commands can be directly sent
to GPS receiver.
a 17 None
18 GPS Pass Thru Mode
End
Remove BCM from mode
where GPS commands can be
directly sent to GPS receiver.
a 18 None
58 Read Station ID
Outputs the currently set station
ID
a 58 Vittrmy dysyopm ID->TK421
59 Set Station ID Sets the current transmitter
station ID
A 59 <station id> RFB IFPS: a 59 TK421
RFB FIPS:
Current Station ID->TK421
60 Read OPP Multicast
Table
Reads the contents of the OPP
Multicast Configuration & Active
Tables
a 60 a i (
Read Active Table
)
a 60 c i (
Read Config Table
)
i=1..16 for a specific index into
the table
or i=? for the contents of the
entire table
Multicast IP Address(es) from the
Configuration or Active Tables.