User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Maintenance
June 1999 6880497G01-B 6-47
Remote Software Download from Choreographer! Network Manager
Refer to Choreographer! Network Manager Concepts Description, Motorola Part No.
6880492G08 and Choreographer!™ Network Manager Installation and Operation, Motorola
Part No. 6880492G07 for the procedures to download software to the RF-B! transmitter
controller dormant flash bank using the Choreographer! network manager. The RF-B!
transmitter controller continues to pass paging traffic during the download. Paging operation
is disrupted temporarily during the cutover to the new software. This disruption is equivalent
to the time the RF-B! transmitter controller takes to reset and achieve GPS synchronization
(approximately 5–10 minutes).