User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Maintenance
June 1999 6880497G01-B 6-39
6-Hour Battery Removal
Perform the following steps to remove the 6-hour battery:
1. From the front of the cabinet, set the RF-B! transmitter controller POWER switch to OFF
(O) (see Figure 6-7).
Figure 6-7: RF-O! Paging Station Power Switches
2. Set the RF-O! transmitter POWER switch to OFF (O) (see Figure 6-7).
3. Set the AC power supply switches to OFF (O) (see Figure 6-7).
RESET
On
Fail
Disable
Alarm
Synth Lock
Simulcast Lock
PA Key
Pwr Ctbck
RF-BATON!
Serial Port
a
RESET
On
Fail
Disable
Alarm
Synth Lock
Simulcast Lock
PA Key
Pwr Ctbck
RF-ORCHESTRA!
Serial Port
a
MAIN
ON
OFF
AUX
ON
OFF
TX
ON
OFF
SERVICE OUTLETS
SUPPRESSOR STATUS
OPERATIONAL
NON-OPERATIONAL
Network Peripherals
302SRH-19
ON
|
O
OFF
POWER
ON
BATTERY
OFF
POWER
BATT. REVT.
RF-AUDIENCE!
896-902 MHz
RF-AUDIENCE!
896-902 MHz
Monitor
DMC
STATUS TRAFFIC
Control
Rx A
Rx B
Alarm
Time Ref
OTA Rx
OTA Err
Network
CONTROL
POWER
Switch
POWER
Switch
RF-B!
Transmitter
Controller
AC Power
Supplies
Transmitter
RF-O!