User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Maintenance
June 1999 6880497G01-B 6-35
RF-B! Transmitter Controller Faceplate
Perform the following procedures to remove and install the RF-B! transmitter controller
faceplate.
Tools
#15 TORX driver
Faceplate Removal
Perform the following steps to remove the RF-B! transmitter controller faceplate.
1. Set the RF-B! transmitter controller POWER switch to OFF (O) (see Figure 6-5).
Figure 6-5: RF-B! Transmitter Controller Front Panel
2. Remove the four #15 TORX screws holding the faceplate to the front of the RF-B!
transmitter controller (see Figure 6-5).
3. Remove the faceplate.
Faceplate Installation
Perform the following steps to install the RF-B! transmitter controller faceplate.
1. Line up all LEDs and switches properly and secure the faceplate to the front of the
RF-B! transmitter controller, using the four TORX screws removed in paragraph,
"Faceplate Removal", Step 2.
2. Set the RF-B! transmitter controller POWER switch to ON (|) (see Figure 6-5).
RESET
Control On
Control Fail
Disable
Alarm
PA Keyed
Exciter Locked
Full Power
Pwr Ctbck
RF-Orchestra!™
Serial Port
302SRH 13
Power
POWER Switch
TORX Screws