User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Maintenance RF-Baton! Transmitter Controller Installation and Operation
6-32 6880497G01-B June 1999
Figure 6-3: Hinge Located on RF-O! Paging Station Cabinet Door
3. Repeat Step 2 for the hinges located in the middle and top of the door.
4. Lift the door out and set aside.
Doors Installation
1. Lift the door and align the hinge pins with the hinge brackets located on the left side of
the main transmitter cabinet.
2. Release the hinge pins compressed in paragraph, "Doors Removal", Step 2 and Step 3.
302SRH-74
Compress