User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Maintenance
June 1999 6880497G01-B 6-29
4. Request the almanac status.
At the prompt, type:
a 211 <Enter>
The following trace is an example output from the a 211 command if the almanac is
valid:
The following trace is an example output from the a 211 command if the almanac is not
valid:
RAM: valid
week: 211
time: 123
#avail: 26
SVID: 0x77d7f3ff
ROM: valid
week: 211
time: 123
#avail: 26
SVID: 0x77d7f3ff
RAM: invalid
week: -------
time: -------
#avail: -------
SVID: -------
ROM: invalid
week: -------
time: -------
#avail: -------
SVID: -------