User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Maintenance RF-Baton! Transmitter Controller Installation and Operation
6-22 6880497G01-B June 1999
b. If the system is an InFLEXion system, the paging batches have more interleaved
control commands. For example:
If the protocol format is suspect, verify the RF-C! controller protocol (reference
RF-Conductor!™ Controller Hardware Installation, Motorola Part No. 6880494G50 or
RF-Conductor!™ Controller Installation, Motorola Part No. 6880494G53).
3. Stop the trace.
At the prompt, type:
a 193 PCLM 1 <Enter>
The trace stops and the terminal displays:
RFB FIPS: RA 193
==batch is contiguous
No freq chng
offset freq & mod type match
==paging just enabled OR batch NOT contiguous
new ctl cmd -
[0]:2625a0
[1]:0
[2]:80000001
==paging just enabled OR batch NOT contiguous
new ctl cmd -
[0]:37b1d0
[1]:0
[2]:80000002