User Manual

RF-Baton! Transmitter Controller Installation and Operation Maintenance
June 1999 6880497G01-B 6-19
2. Determine if the RF-B! transmitter controller and RF-C! controller have a time
discrepancy using the Page Control Receive manager (PCRM) trace on the RF-B!
transmitter controller.
At the prompt, type:
a 192 PCRM 4 <Enter>
The terminal displays the PCRM 4 trace.
3. Disable the launch time trace.
At the prompt, type:
a 193 PCRM 4 <Enter>
The trace stops and the terminal displays:
RFB FIPS: RA 193
4. Observe the data trace to ensure that the Launch time is always greater than the pSOS
time. This checks the RF-B! transmitter controller and the RF-C! controller time
synchronization.
Typically, the launch time is 6 seconds later than pSOS time and must be a minimum of
2 seconds. Both the RF-C! controller and the RF-B! transmitter controller must be GPS
synchronized.
If the pSOS time is greater than the Launch time, troubleshoot the RF-C! controller to
make sure the RF-C! is sending the message data to the RF-B! transmitter controller early
enough (refer to RF-Conductor!™ Controller Hardware Installation, Motorola Part No.
6880494G50 or RF-Conductor!™ Controller Installation, Motorola Part
No. 6880494G53).
PDM type: 16
Seq number: 1
Launch minute: 8 Launch second: 11 Launch ticks: 36
Calc Launch minute: 8 Calc Launch second: 11 Calc Launch ticks: 28
pSOS minute: 8 pSOS second: 5 pSOS ticks: 50
Queue minute: 38 Queue second: 11 Queue ticks: 36