User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Operation
June 1999 6880497G01-B 5-31
Initial Station Error Log
The following station error log entries are made during RF-B! transmitter controller
initialization:
The initial station error log should be cleared after GPS initialization is complete, using the
FIPS a 111 action command.
RFB FIPS: <STATION_ERROR> <LOG_ERROR> <S_PAGING_IS_DISABLED>
<PAGE_CONTROL_RECEIVE_MANAGER> <2834> <1996/04/02.12:00:22> <1>
RFB FIPS: <STATION_ERROR> <LOG_ERROR> <E_FLUSH_PDM_LIST>
<PAGE_CONTROL_LAUNCH_MANAGER> <387> <1996/04/02.12:00:22> <1>
RFB FIPS: <STATION_ERROR> <LOG_ERROR> <S_RSR_POWER_UP_RESET>
<ROOT> <570> <1996/04/02.12:00:01> <1>