User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Operation RF-Baton! Transmitter Controller Installation and Operation
5-26 6880497G01-B June 1999
GPS Almanac Status
The following GIPS action command displays information corresponding to the currently
used satellite almanac.
Use the following command to view the almanac status,.
At the prompt, type:
a 211 <Enter>
The system responds
The GPS receiver updates the almanac periodically. This status message displays the status of
the currently used almanac, located in Random Access Memory (RAM) as well as the almanac
stored in Read Only Memory (ROM).
RFB FIPS: RA 211
RAM: valid
week: 213
time: 123
#avail: 27
SVID: 0x77f7f3ff
ROM: valid
week: 213
time: 123
#avail: 27
SVID: 0x77f7f3ff