User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Operation
June 1999 6880497G01-B 5-25
The receiver and satellite status words can be decoded using the FIPS action command table
in Appendix C.
Satellite Status
The following action command displays a summary of the GPS constellation showing the
number of visible satellites (up to 12), the Doppler frequency, location and health of each.
At the prompt, type:
a 209 <Enter>
The system responds:
For this message, the Doppler frequency is in Hertz, the elevation and azimuth are in degrees,
and the satellite health is shown in Table 5-11:
Table 5-11: Satellite Health
Health Description
0 Healthy and not removed
1 Healthy and not removed
2 Unhealthy and not removed
3 Unhealthy and removed
RFB FIPS: RA 209
ID=3 Doppler=2256 ELE=30 AZI=125 HEALTH=0
ID=14 Doppler=-2724 ELE=40 AZI=209 HEALTH=0
ID=16 Doppler=-402 ELE=45 AZI=269 HEALTH=0
ID=18 Doppler=2870 ELE=35 AZI=316 HEALTH=0
ID=19 Doppler=2261 ELE=20 AZI=280 HEALTH=0
ID=22 Doppler=-2224 ELE=53 AZI=46 HEALTH=0
ID=31 Doppler=3385 ELE=15 AZI=163 HEALTH=0