User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Operation RF-Baton! Transmitter Controller Installation and Operation
5-22 6880497G01-B June 1999
GPS Values
Use the following procedures to access GPS values.
GPS Time and Date
Use the following FIPS action commands to acquire the current GPS time and date.
1. Use the following command to get the current GPS time.
At the prompt, type:
a 215 <Enter>
The system responds
RFB FIPS: RA 215 Time 21:18:01
Note: The returned time is displayed in Greenwich Mean Time (GMT).
2. To get the current GPS date.
At the prompt, type:
a 214 <Enter>
The system responds
RFB FIPS: RA 214 Date: 10/28/1998
As long as the RF-B! transmitter controller is operating with GPS, the GPS time and date are
also the system time and date.