User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Operation
June 1999 6880497G01-B 5-11
Reset and Initialization
The RF-B! transmitter controller operation has three different types of resets. This section
explains the differences between the available reset types. Motorola encourages a thorough
understanding of each reset type to minimize the station down time when a reset is necessary.
The available reset types are:
• Power-on reset
• Hard reset
• Software reset
Power-on Reset
The power-on reset is the most thorough reset available. This reset occurs when power to the
RF-B! transmitter controller is interrupted. A power-on reset returns the RF-B! transmitter
controller microprocessor, external interfaces, the Ultra-High Stability Oscillator (UHSO), and
GPS receiver to initial default conditions. Upon power-on reset, the following actions are
performed:
• RF-B! transmitter controller control software boot
• Network initialization
• FIPS initialization
• Complete GPS receiver and simulcast initialization
After the RF-B! transmitter controller software boot, network initialization, and FIPS
initialization are complete, the FIPS banner appears on the service terminal screen (if
connected).
>>>>>>> MOTOROLA RF-BATON! <<<<<<<
>>>>>>> WIRELESS MESSAGING SYSTEM (WMS) <<<<<<<
>>>>>>> (c) Copyright 1998 Motorola, Inc. <<<<<<<
>>>>>>> All Rights Reserved. <<<<<<<
>>>>>>> DEFAULT PARAMETER VALUES NOT LOADED <<<<<<<