User Manual

RF-Orchestra!™ Transmitter Installation and Operation System Description
July 2000 6880493G02-C 2-27
RF-O! Paging Station Options
The following paragraphs detail the options available for the RF-O! Paging Station.
Hardware Options
The following hardware options are available for the RF-O! paging station:
• Network peripheral options (Option X267)
• RF-B! transmitter controller without GPS receiver (Option X594)
• RF-B! transmitter controller with GPS receiver (Option X179)
• Battery revert (Option X649)
• RF-O! Transmitter peripheral options (Option X263)
• RF-A! receiver (Option X349, X351, X352, X353)
• RF-A! receiver peripheral package (Option X88, X89)
Combined FLEX, InFLEXion, and ReFLEX protocol software (Option X496)
Software Options
The following software options are available for the RF-O! paging station:
Combined FLEX, InFLEXion, and ReFLEX protocol software (Option X496)
– RF-B! transmitter controller (Option Y967AE)
– RF-O! transmitter (Option Y967AA)
– RF-A! receiver (Option Y967AF)
Network Peripheral Options (Option X267)
An optional network peripheral package connects with the RF-O! transmitter to a network
TELCO/DDS service. These options enable communications between the RF-B! transmitter
controller site and the RF-C! controller. A typical network configuration of peripheral
equipment may consist of a network router, a network CSU/DSU, and a network V.34
modem. At the time of purchase, the paging system provider defines the particular
complement of network interface equipment.