User Manual

RF-Orchestra!™ Transmitter Installation and Operation Alarms and Error Messages
July 2000 6880493G02-C F-29
S_RSR_LOSS_OF_CLOCK_RESET
The last reset was caused by a loss of frequency
reference to the clock sub-module.
Major
If the error persists, save the error log and
contact Motorola.
S_RSR_POWER_UP_RESET
The last reset was caused by the power-up reset
circuit.
Informational
Ignore. If the error persists, save the error
log and contact Motorola.
S_RSR_SOFT_RESET_PIN_RESET
(Removed after RFO 1.3.0)
The last reset was caused by an external signal driving
RESET_S. (Reset button on RF-O! was pushed)
Informational
Ignore. If the error persists, save the error
log and contact Motorola.
S_RSR_SOFTWARE_RESET
(Removed after RFO 1.3.0)
The last reset was caused by the CPU32+ executing a
RESET instruction.
Informational
Ignore. If the error persists, save the error
log and contact Motorola.
S_RSR_SOFTWARE_WATCHDOG_RESET
The last reset was caused by a software watchdog
time-out.
Informational
Ignore. If the error persists, save the error
log and contact Motorola.
S_RSR_SW_RESET_CNTRLER_REQ_LINE_LOSS
The RF-O! transmitter performed a software reset due
to loss of RFC_REQ line from the transmitter controller
(RF-B!).
Informational No action required.
S_RSR_SW_RESET_FIPS_A_117
The RF-O! transmitter performed a software reset due
to user execution of RFO FIPS: a 117.
Informational No action required.
S_RSR_SW_RESET_SWDL_CUTOVER
The R-FO! performed a software reset due to a cutover
following a successful software download.
Informational No action required.
S_RSR_SW_RESET_UNDEFINED_CAUSE
The R-FO! performed a software reset due to an
undefined cause.
Major
If the error persists, save the error log and
contact Motorola.
S_STATION_RESET_x.x.x
Issued upon any Station Reset or Station Power-up.
“x.x.x” is the software version number.
Informational No action required.
Table F-3: RF-O! Transmitter Error/Alarm Code Definitions (Sheet 27 of 27)
Error and Description
Alarm
Severity
Action