User Manual

D-16 6880493G02-C July 2000
FIPS Action Commands (ver 2.0.0) RF-Orchestra!™ Transmitter Installation and Operation
D-16 6880493G02-C July 2000
Set Output Power
a 88 x y
Set AM or FM Output Power. For a single PA, 2
Power Supply Configuration, the Maximum AM
Power Setting is 75 Watts. See the RFO! Linear
Transmitter Power Chart for Maximum and
Minimum settings for your particular configuration.
x = Modulation Type
0 = FM (ReFLEX)
1 = AM (InFLEXion)
y = User Requested Power Setting (watts)
RFO FIPS: a 88 ?
RFO FIPS: RA 88
<<< SET POWER OUTPUT LEVEL >>>
Usage: A 88 x y
x = Modulation Type. 0=FM, 1=AM
y = Desired Power Level Per Subchannel (watts).
Valid FM Range for Current 2 PA Configuration is 25 - 290 Watts.
Valid AM Range is 40 - 150 Watts.
RFO FIPS: a 88 0 100
RFO FIPS: RA 88
<<< SET FM POWER OUTPUT >>>
2 PA Deck(s) Detected
FM Modulation
FM Power Level = 100 Watt(s) per Subchannel
Subchannel(s) Minimum Maximum
-------------------------------
1 040 290
2 040 145
---------------------------------------------
NOTE: This Configuration Will Allow The Transmitter to Key With 1
thru 2 FM Subchannels. All Other FM Key Requests Will Be Ignored.
=============================================
RFO FIPS: a 88 1 65
RFO FIPS: RA 88
<<< SET AM POWER OUTPUT >>>
2 PA Deck(s) Detected
AM Modulation
AM Power Level = 65 Watt(s) per Subchannel
Subchannel(s) Minimum Maximum
-------------------------------
1 065 150
2 040 075
---------------------------------------------
NOTE: This Configuration Will Allow The Transmitter to Key With 1
thru 2 AM Subchannels. All Other AM Key Requests Will Be Ignored.
=============================================
Name and
Command
Description Example