User Manual

Operation RF-Orchestra!™ Transmitter Installation and Operation
5-4 6880493G02-C July 2000
The following command is an example of an action command. This action command
interfaces with power amplifier #1 and returns the PA module status to the user. Appendix D
lists the RF-O! transmitter action commands.
Figure 5-2: Action Command Example
RFO FIPS: a 68 1 c 0 1 0
RFO FIPS: RA 68
<<< READ PA DECK 02 A/D 01 >>>
Reg 00: DPA= 100 => 0.11 Amp(s)
Reg 01: PDPA= 092=> 1.95 Amp(s)
Reg 02: OD= 026 => 8.68 Watt(s)
Reg 03: FPA 1 A= 089 => 1.59 Amp(s)
Reg 04: FPA 1 B= 090 => 1.59 Amp(s)
Reg 05: FPA 2 A= 094 => 1.59 Amp(s)
Reg 06: FPA 2 B= 099 => 1.59 Amp(s)
Reg 07: FPA 3 A= 094 => 1.59 Amp(s)
Reg 08: FPA 3 B= 099 => 1.59 Amp(s)
Reg 09: Fwd= 050 => 41.34 Watt(s)
Reg 0A: Rfltd= 005 => 1.10 Watt(s)
Reg 0B: A/D Test= 128=> PASS (> 126)
===========================================