User Manual

RF-Orchestra!™ Transmitter Installation and Operation Installation
July 2000 6880493G02-C 4-13
Figure 4-6: Typical Network Peripherals with Paging Station Control Elements
Network Router
The network router used in the RF-O! paging station acts as a network access server that
connects asynchronous devices to a Local Area Network (LAN) or Wide Area Network
(WAN) through network and terminal emulation software.
Route the TELCO provided line through the top of the cabinet using the data line entry port
provided (see Figure 4-5). Route the TELCO line through the cabinet to the rear of the router
and connect the data line to one of the serial port connectors on the rear of the router
(Figure 4-7).
The configuration and network Internet Protocol (IP) plan for a particular location are
determined by the paging network provider. Refer to the appropriate router product manual
for operation and configuration details of the router being used.
OCM
Control
Module
V.34
Modem
RF-B!
1 IP Addr
Network Router
3-Port IP Addr
RF-A! Rx
1 IP Addr
CSU/DSU
TELCO
TELCO
DDS
Serial
Port
BCM/OCM/RF-A!
Serial Ports
GPS
Antenna
Plug-and-Play
Interface
Reference
(10 MHz)
Exciter Fc/Tx PA Control/Data
Async
10 MHz/GPS to RF-A!
Ethernet Port (AUI)
Port
Async
Serial
Port