User`s guide

VXL Instruments Ltd. Itona TC15YY Hardware User’s Guide
Installation 11
Step Four: Connect to the Server
The Thin Client can be physically connected to the server/network :
• LAN connection through TCP/IP
LAN connection through TCP/IP
Connect one end of a 10/100/1000 cable to the LAN port of the client. Connect the other end to a LAN
hub as shown in the figure below.
LAN Connection through TCP/IP
Press the power button to power up the Itona TC15yy. The front panel LED lights up and the client boots
up with a BEEP sound and takes you to the Connection Manager screen. Refer to the Software User’s
Guide for configuring the client.
ICA Server
Ethernet
HUB
10/100Base-T
Host 2
Workstation
Host 1
Winlinx
Thin Client