Itona TC15yy Hardware User Guide
Copyright © 2004-2012 VXL Instruments Limited. All Rights Reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. No part of this guide may be reproduced or transmitted in any form or means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of the manufacturer.
Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Energy Star Compliant Product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products practices. Products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 15 and 30 minutes of user inactivity.
Regulatory Certifications iii
Table of Contents Federal Communication Commission (FCC) Statement i Energy Star Compliant Product ii Regulatory Certifications iii 1 1 2 3 4 Introduction Features 1 Optional Features 2 About the User Guide 2 Abbreviations and Acronyms 2 Chapters in the Manual 3 Installation 4 Unpacking the Unit 4 Preparing to Connect 4 Connecting the Accessories and Power Supply 5 Connecting to the Server 6 Specifications 8 Hardware 8 Mechanical 8 Environmental Operating 8 Electrical
1 Introduction Thin Clients are terminal devices that connect to multi-user application servers operating under Citrix MetaFrame and Windows Server 2000/2003 operating systems. This guide covers installation procedure and hardware details of Itona TC 15yy series.. 1 1. Power Button. 2. USB Ports. 2 Figure 1: ItonaTC15yy Itona TC 15yy series delivers smart and robust solutions for Thin Client computing.
Optional Features Wireless LAN is an optional features available for Itona TC15yy series. Note: The optional features cannot be upgraded after the purchase of the product. Please contact the reseller or dealer from whom you purchased the product for information about optional features. About the User Guide This User Guide provides step-by-step instructions to install TC15yy series hardware. The specifications and troubleshooting steps are also included in this User Guide.
Chapters in the Manual Chapter No Chapter Name Description 1 Introduction Contains an overview of the product, information about this guide and abbreviations used in this guide. 2 Installation Contains the procedure to set up the hardware. 3 Specifications Contains hardware, mechanical, electrical, interface and operating environment specifications. 4 Troubleshooting Contains solutions to problems that you may encounter while using the product.
2 Installation You have to install the client before you can use it. Installation involves setting up the hardware and connecting the peripherals required for normal use. To install the Itona TC15yy series hardware, perform the following steps: 1. Unpack the unit. 2. Prepare to connect. 3. Connect the accessories and power. 4. Connect to the server Each step is explained in detail in this chapter.
3. Place the product on the table in a location that provides quick and easy access to the power Inlet plug to shutdown the power in emergencies. 4. Ensure a minimum space of 2 inches (5 cm) on all sides of the unit for efficient convection cooling. Connecting the Accessories and Power Supply The various connectors available on the rear panel of the client are shown in Figure 2. 1. Wireless LAN 2. DVI-I Port 3. Ethernet Port 4. Mic 5. 3 USB port 6. DC input 16V /2.5A 7. Pedestal 8.
Connectors Connector Symbol DVI-I port USB port Audio output (LINE OUT) port Microphone input port RJ45 Ethernet port Table 3: Connector Symbols Note: Before connecting any cables, ensure that the power cable is unplugged from the unit. To connect various accessories and power supply: 1. Connect the DVI cable from your display unit to the DVI-I port. 2. Connect the USB devices to the USB ports. 3. Connect the external powered speakers to the audio output (LINE OUT) port. 4.
Figure 3: LAN Connection through TCP/IP 3. Press the power button to switch on the ItonaTC15yy series thin client. The front panel LED lights up and the client starts with a beep sound. The Connection Manager screen appears. Note: To configure the client, refer to the Software User’s Guide.
3 Specifications Hardware Processor VIA C7 / TC1000 VGA Memory Shared Video Memory 32MB max Flash IDE 44Pin / 90D RAM DDR2 SO DIMM Networking 10/100/1000Mbps Power Supply External Adapter Display Support 1920x1200 60Hz 16/32 Bits Mechanical Height 190 mm Width 36.5 mm Depth 142 mm Weight 0.7 Kg (max) Environmental Operating Operating temperature + 5oC to +35oC Storage temperature - 20o C to +60oC Humidity 20% to 80% RH Max noncondensing Electrical Power 2.
4 Troubleshooting This chapter contains solutions for problems you may encounter while using the product. 9 Problem Solution The power-LED on front panel does not glow when the client is switched on. Ensure that the power cord is plugged into an AC outlet. There is no display on the monitor, though the powerindicating LED glows. Ensure the monitor is plugged in to the terminal. The mouse (or keyboard) does not work when the client is switched on.
Appendix Connectors The following section provides pin details for various connectors on the rear panel of the client. 10/100/1000 Ethernet LAN Port RJ-45 modular 8-pin jack. 10/100/1000 Mbps. Pin Signal 1 TxD+ 2 TxD- 3 RxD+ 6 RxD- DVI-I Port Pin C1 to C5 carry the analogue signal.24+ 5 pin DVI Connector.
6 DDC Clock 16 Hot Plug Detect C2 Analog Green 7 DDC Data 17 TMDS Data 0- C3 Analog Blue 8 Analog Vertical Sync 18 C4 Analog Horizontal Sync 9 TMDS Data 1- 19 C5 Analog Ground (analog R, G & B return) 10 TMDS Data 1+ 20 TMDS Data 0+ TMDS Data 0/5 Shield TMDS Data 5- Audio / Microphone Port Standard audio jacks. USB Port 4-pin series-A receptacle. 4~ 5 ports depending on the model. Both USB1.1 and USB2.
