Itona TC23yy Hardware User’s Guide VXL Instruments Ltd, NO.17, House of Excellence, Electronics City, Hosur Road, Bangalore – 560 100, INDIA www.vxl.
VXL Instruments Ltd. Itona TC23yy Hardware User’s Guide Copyright and Trademark notices ALL RIGHTS RESERVED. Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. No part of this guide may be reproduced or transmitted in any form or means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of the manufacturer.
VXL Instruments Ltd. Itona TC23yy Hardware User’s Guide Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VXL Instruments Ltd. Itona TC23yy Hardware User’s Guide Preface Thank you for purchasing the Itona TC23yy Series Thin Client. This guide contains information to setup and use the hardware of Itona TC23yy Series. The guide consists of the following chapters: Preface • Introduction: provides an overview of the product. • Installation: contains the procedure to setup the hardware. • Specifications: provides hardware, mechanical, electrical, interface and operating environment specifications.
VXL Instruments Ltd. Itona TC23yy Hardware User’s Guide Table of Contents Introduction ........................................................................................................................................6 Overview........................................................................................................................................................6 Features .................................................................................................................
Itona TC23yy VXL Instruments Ltd. Hardware User’s Guide Introduction Overview Thin Clients are essentially terminal devices that connect to multi-user application servers operating under Citrix MetaFrame and Windows 2000/ 2003 operating systems. This guide covers installation and hardware details of Itona TC23yy Series. Itona TC23yy Itona TC23yy Series deliver smart and robust solutions for Thin Client computing.
VXL Instruments Ltd. Itona TC23yy Hardware User’s Guide Features The product is equipped with a 10/100 Ethernet port that gives an instant connection to a multi-user Windows NT application server. Also provided are serial, parallel and video display ports. USB and PS/2 compatible keyboard/Mouse ports are available for quick setup and use.
VXL Instruments Ltd. Itona TC23YY Hardware User’s Guide Installation This chapter describes hardware installation of the product. Step One: Unpack Unpack the unit taking care not to drop the product whilst removing from the packaging.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Step Three: Connect accessories and power 9 NOTE: BEFORE CONNECTING ANY CABLES, ENSURE POWER CABLE IS UNPLUGED FROM THE UNIT. PLEASE USE 6A (MIN) / 250V AC 0.75 sq mm, H05VV-F CERTIFIED POWER CORD. Pictures below show the various connectors available on the rear panel of the client.
VXL Instruments Ltd. Itona TC23YY Hardware User’s Guide The table below identifies the devices to be used with each connector of the client.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Step Four: Connect to the Server The Thin Client can be physically connected to the server/network in three ways: • LAN connection through TCP/IP • Direct connection through RS232 • Dial-in remote connection through a modem LAN connection through TCP/IP Connect one end of a 10/100 cable to the LAN port of the client. Connect the other end to a LAN hub as shown in the figure below.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Direct Connection through RS232 Connect one end of an RS232 cross cable to a serial port of the client. Connect the other end to a serial port of the server as shown in the figure below. Winlinx Thin Client Server COM PORT COM PORT RS232C CROSS Direct Connection through RS232 Dial-In Remote Connection through a Modem Connect one end of an RS232 straight cable to a serial port of the client.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Specifications Hardware • Processor: VIA C7 ™ nanoBGA2 1GHz • VGA Memory: Shared Video Memory 64MB max • Flash : IDE 40 pin, 32MB • RAM: 256MB Mechanical Itona TC23yy • Height: 228 mm. • Width: 50 mm. • Depth: 213 mm. • Weight: 3.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Connectors and Cables Connectors The following tables provide pin details for various connectors on the rear panel of the client. COM Port 9-pin D-type male connector. RS232C compatible, operating at 115.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide 10/100 LAN Port RJ-45 modular 8-pin jack.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Cables 10/100 LAN Cable Cross Connection - (Without Hub) RJ45 Pin RJ45 Pin TXD+ 1 3 RXD+ TXD- 2 6 RXD- RXD+ 3 1 TXD+ RXD- 6 2 TXD- Straight Connection - (With Hub) RJ45 Pin RJ45 Pin TXD+ 1 1 TXD+ TXD- 2 2 TXD- RXD+ 3 3 RXD+ RXD- 6 6 RXD- COM Port (Serial Port) Cables Serial devices like modems and printers use 25 pin D-type connectors for RS232 connections.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide 9-pin to 25-pin Straight Connection 9 Pin Connector (Thin Client) RTS DTR TXD GND DCD RXD DSR CTS 7 4 3 5 1 2 6 8 25 Pin Connector 4 20 2 7 8 3 6 5 RTS DTR TXD GND DCD RXD DSR CTS Printer Cable The following table shows the pin connections of the Standard Centronics parallel cable. Some manufacturers change pin functions or polarity on their printers. For such printers, custom cables may be necessary.
Itona TC23YY VXL Instruments Ltd. Hardware User’s Guide Troubleshooting This chapter contains solutions for problems you may encounter while using the product. Problem Solution • The Power-LED on front panel does not glow when the client is switched on. 9 Ensure that the power cord is plugged into an AC outlet. 9 Check the fuse in the power-plug, if available. • There is no display, though the power-indicating LED glows. 9 Ensure that the video cable is properly connected.
