Itona DxxS Hardware User’s Guide VXL Instruments Ltd, NO.17, House of Excellence, Electronics City, Hosur Road, Bangalore – 560 100, INDIA www.vxl.
VXL Instruments Ltd. Itona DxxS Hardware User’s Guide Copyright and Trademark notices ALL RIGHTS RESERVED. Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. No part of this guide may be reproduced or transmitted in any form or means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of the manufacturer.
VXL Instruments Ltd. Itona DxxS Hardware User’s Guide Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VXL Instruments Ltd. Itona DxxS Hardware User’s Guide Preface Thank you for purchasing the Itona DxxS Series Thin Client. This guide contains information to setup and use the hardware of Itona DxxS Series. The guide consists of the following chapters: Preface • Introduction: provides an overview of the product. • Installation: contains the procedure to setup the hardware. • Specifications: provides hardware, mechanical, electrical, interface and operating environment specifications.
VXL Instruments Ltd. Itona DxxS Hardware User’s Guide Table of Contents Introduction ........................................................................................................................................6 Overview........................................................................................................................................................6 Features ...................................................................................................................
Itona DxxS VXL Instruments Ltd. Hardware User’s Guide Introduction Overview Thin Clients are essentially terminal devices that connect to multi-user application servers operating under Citrix MetaFrame and Windows 2000/ 2003 operating systems. This guide covers installation and hardware details of Itona DxxS Series. Power Button Smart Card Reader 2 USB Ports Itona DxxS Front View Itona DxxS Series deliver smart and robust solutions for Thin Client computing.
VXL Instruments Ltd. Itona DxxS Hardware User’s Guide Features The product is equipped with a 10/100 /1000 Ethernet port that gives an instant connection to a multiuser Windows NT application server. Also provided are serial, parallel, VGA and DVI-I Ports. USB and PS/2 compatible keyboard/Mouse ports are available for quick setup and use. Optional Features • Smart Card reader • Wireless LAN • 3rd Serial Port Note: The optional features cannot be upgraded in the field.
VXL Instruments Ltd. Itona DXXS Hardware User’s Guide Installation This chapter describes hardware installation of the product. Step One: Unpack Unpack the unit taking care not to drop the product whilst removing from the packaging.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Step Three: Connect accessories and power 9 NOTE: BEFORE CONNECTING ANY CABLES, ENSURE POWER CABLE IS UNPLUGED FROM THE UNIT. PLEASE USE 6A (MIN) / 250V AC 0.75 sq mm, H05VV-F CERTIFIED POWER CORD. Pictures below show the various connectors available on the rear panel of the client.
VXL Instruments Ltd. Itona DXXS Hardware User’s Guide The table below identifies the devices to be used with each connector of the client.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Step Four: Connect to the Server The Thin Client can be physically connected to the server/network in three ways: • LAN connection through TCP/IP • Direct connection through RS232 • Dial-in remote connection through a modem LAN connection through TCP/IP Connect one end of a 10/100/ 1000 cable to the LAN port of the client. Connect the other end to a LAN hub as shown in the figure below.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Direct Connection through RS232 Connect one end of an RS232 cross cable to a serial port of the client. Connect the other end to a serial port of the server as shown in the figure below. Winlinx Thin Client Server COM PORT COM PORT RS232C CROSS Direct Connection through RS232 Dial-In Remote Connection through a Modem Connect one end of an RS232 straight cable to a serial port of the client.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Specifications Hardware • Processor VIA C7-M ULV ™ nano BGA2 1.6GHz • VGA Memory: Shared Video Memory 32MB max • Flash : IDE 40 pin • RAM: 256MB ~ 2GB DDRII SODIMM 533/667MHz • Networking : 10/100/1000Mbps • Maximum Display resolution: VGA - 16/32 Bits 1920x1200 @60Hz max. DVI-I to VGA - 16/32 Bits 1920x1200 @60Hz max. OR DVI-I to DVI - 16/32 Bits 1920x1200 @60Hz max.
VXL Instruments Ltd.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Connectors and Cables Connectors The following tables provide pin details for various connectors on the rear panel of the client. COM Port 9-pin D-type male connector. RS232C compatible, operating at 115.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide DVI Port Pin C1 to C5 carry the analogue signal.24+ 5 pin DVI Connector.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Cables 10/100/1000 LAN Cable Cross Connection - (Without Hub) RJ45 Pin RJ45 Pin TXD+ 1 3 RXD+ TXD- 2 6 RXD- RXD+ 3 1 TXD+ RXD- 6 2 TXD- Straight Connection - (With Hub) RJ45 Pin RJ45 Pin TXD+ 1 1 TXD+ TXD- 2 2 TXD- RXD+ 3 3 RXD+ RXD- 6 6 RXD- COM Port (Serial Port) Cables Serial devices like modems and printers use 25 pin D-type connectors for RS232 connections.
Itona DXXS VXL Instruments Ltd.
Itona DXXS VXL Instruments Ltd. Hardware User’s Guide Troubleshooting This chapter contains solutions for problems you may encounter while using the product. Problem Solution • The Power-LED on front panel does not glow when the client is switched on. 9 Ensure that the power cord is plugged into an AC outlet. 9 Check the fuse in the power-plug, if available. • There is no display, though the power-indicating LED glows. 9 Ensure that the video cable is properly connected.
