Specifications

SCPI Command Quick Reference
Command
Description
FUNCtion Equate a function and range with groups of channels
:CONDition (@<ch_list>) Sets function to sense digital state
:CUSTom [<range>,](@<ch_list>) Links channels to custom EU conversion table loaded by DIAG:CUST:LIN
or DIAG:CUST:PIEC commands
:REFerence [<range>,](@<ch_list>) Links channels to custom reference temperature EU conversion table loaded
by DIAG:CUST:PIEC commands
:TC <type>,[<range>,](@<ch_list>) Links channels to custom temperature EU conversion table loaded by
DIAG:CUST:PIEC and performs ref temp compensation for <type>
:FREQuency (@<ch_list>) Configure channels to measure frequency
:RESistance <excite_current>,[<range>,](@<ch_list>) Configure channels to sense resistance measurements
:STRain Links measurement channels as having read bridge voltage from:
:FBENding [<range>,](@<ch_list>) Full BENding
:FBPoisson [<range>,](@<ch_list>) Full Bending Poisson
:FPOisson [<range>,](@<ch_list>) Full POisson
:HBENding [<range>,](@<ch_list>) Half BENding
:HPOisson [<range>,](@<ch_list>) Half Poisson
[:QUARter] [<range>,](@<ch_list>) QUARter
RTD 85 | 92
TCouple, CUST|E|EEXT|J|K|N|S|T thermocouples
THERmistor 2250 | 5000 | 10000 thermistors
:TEMPerature <sensor_type>,<sub_type>,
[<range>,](@<ch_list>)
Configure channels for temperature measurement types above:
excitation current comes from Current Output SCP.
:TOTalize (@<ch_list>) Configure channels to count digital state transitions
:VOLTage[:DC] [<range>,](@<ch_list>) Configure channels for dc voltage measurement
RTD 85 | 92 RTDs
THERmistor,5000 thermistors
:REFerence <sensor_type>,<sub_type>,[<range>,](@<ch_list>) Configure channel for reference temperature measurements above:
:CHANnels (@<ref_channel>),(@<ch_list>) Groups reference temperature channel with TC measurement channels
:TEMPerature <degrees_c> Specifies the temperature of a controlled temperature reference junction
:STRain
:EXCitation <excite_v>,(@<ch_list>) Specifies the Excitation Voltage by channel to the strain EU conversion
:STRain
:EXCitation <excite_v>,(@<ch_list>) Specifies the Excitation Voltage by channel to the strain EU conversion
:EXCitation? (@<channel>) Returns the Excitation Voltage set for <channel>
:GFACtor <gage_factor>,(@<ch_list>) Specifies the Gage Factor by channel to the strain EU conversion
:GFACtor? (@<channel>) Returns the Gage Factor set for <channel>
:POISson <poisson_ratio>,(@<ch_list>) Specifies the Poisson Ratio by channel to the strain EU conversion
[SENSe:]STRAin (continued)
:POISson? (@<channel>) Returns the Poisson Ratio set for <channel>
:UNSTrained <unstrained_v>,(@<ch_list>) Specifies the Unstrained Voltage by channel to the strain EU conversion
:UNSTrained? (@<channel>) Returns the Unstrained Voltage set for <channel>
SOURce
:FM
[:STATe] 1|0|ON|OFF,(@<ch_list>) Configure digital channels to output frequency modulated signal
[:STATe]? (@<channel>) Returns state of channels for FM output
:FUNCtion
[:SHAPe]
:CONDition (@<ch_list>) Configures channels to output static digital levels
VT1419A Command Reference
Command Quick Reference
324 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com