Specifications

337: Digital I/O SCP output current
341: Freq/PWM/FM SCP internal data0 register
342: Freq/PWM/FM SCP internal data1 register
343: Freq/PWM/FM SCP internal parameter register
344: Freq/PWM/FM SCP on-board processor self-test
345: Freq/PWM/FM SCP on-board processor self-test
346: Freq/PWM/FM SCP user inputs
347: Freq/PWM/FM SCP user outputs
348: Freq/PWM/FM SCP outputs ACTive/PASSive
349: Freq/PWM/FM SCP output interrupts
350: Watchdog SCP enable/disable timer
351: Watchdog SCP relay drive and coil closed
352: Watchdog SCP relay drive and coil open
353: Watchdog SCP I/O Disconnect line
354: Watchdog SCP I/O Disconnect supply
*WAI
Wait-to-continue. Prevents an instrument from executing another command until the
operation begun by the previous command is finished (sequential operation).
NOTE Do not use *WAI to determine when the CAL:SETUP or CAL:TARE commands
have completed. Instead, use their query forms CAL:SETUP? or CAL:TARE?.
CAL:SETUP? and CAL:TARE? return a value only after
the CAL:SETUP or
CAL:TARE operations are complete.
VT1419A Command Reference
Common Command Reference
320 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com