Specifications

*ESE?
Standard Event Status Enable Query. Returns the weighted sum of all enabled
(unmasked) bits in the Standard Event Status Register. The C-SCPI type for this
returned value is int16.
*ESR?
Standard Event Status Register Query. Returns the weighted sum of all set bits in
the Standard Event Status Register. After reading the register, *ESR? clears the
register. The events recorded in the Standard Event Status Register are independent
of whether or not those events are enabled with the *ESE command to set the
Standard Event Summary Bit in the Status Byte Register. The Standard Event bits
are described in the *ESE command. The C-SCPI type for this returned value is
int16.
*GMC? <name>
Get Macro query. Returns arbitrary block response data which contains the
command or command sequence defined for <name>. For more information on
arbitrary block response data see page 180.
*IDN?
Identity. Returns the device identity. The response consists of the following four
fields (fields are separated by commas):
·
Manufacturer
·
Model Number
·
Serial Number (returns 0 if not available)
·
Driver Revision (returns 0 if not available)
*IDN? returns the following response strings depending on model and options:
AGILENT TECHNOLOGIES,E1419B,<serial number>,<revision number>
·
The C-SCPI type for this returned value is string.
NOTE This response varies with date of the firmware. The revision will vary with the
revision of the driver software installed. This is the only indication of which version
of the driver is installed.
*LMC?
Learn Macros query. Returns a quoted string name for each currently defined
macro. If more than one macro is defined, the strings are separated by commas (,). If
no macro is defined, *LMC? returns a null string.
VT1419A Command Reference
Common Command Reference
Chapter 6 313
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com