Specifications

STATus:QUEStionable:NTRansition?
STATus:QUEStionable:NTRansition? returns the value of bits set in the Negative
Transition Filter (NTF) register.
Comments
·
Returned Value: Decimal weighted sum of all set bits. The C-SCPI type is
uint16.
·
Related Commands: STAT:QUES:NTR
·
*RST Condition: No change
Usage STAT:QUES:NTR? Enter statement returns current value of bits
set in the NTF register
STATus:QUEStionable:PTRansition
STATus:QUEStionable:PTRansition <transition_mask> sets bits in the Positive
Transition Filter (PTF) register. When a bit in the PTF register is set to one, the
corresponding bit in the Condition register must change from a zero to a one in
order to set the corresponding bit in the Event register. When a bit in the PTF
register is zero, a positive transition of the Condition register bit will not change the
Event register bit.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
transition_mask numeric (uint16) 0 - 32767 none
Comments
·
<transition_mask> may be sent as decimal, hex (#H), octal (#Q), or binary (#B).
·
If both the STAT:QUES:PTR and STAT:QUES:NTR registers have a
corresponding bit set to one, any transition, positive or negative, will set the
corresponding bit in the Event register.
·
If neither the STAT:QUES:PTR or STAT:QUES:NTR registers have a
corresponding bit set to one, transitions from the Condition register will have no
effect on the Event register.
·
Related Commands: STAT:QUES:PTR?, STAT:QUES:NTR
·
Set to all ones by: STAT:PRESet and power-on.
·
*RST Condition: No change
Usage STAT:QUES:PTR 1024 When “FIFO Overflowed” bit goes true, set
bit 10 in Status Operation Event register.
VT1419A Command Reference
STATus
Chapter 6 301
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com