Specifications

STATus:QUEStionable:ENABle
STATus:QUEStionable:ENABle <enable_mask> sets bits in the Enable register
that will enable corresponding bits from the Event register to set the Questionable
summary bit.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
enable_mask numeric (uint16) 0-32767 none
Comments
·
The <enable_mask> parameter may be sent as decimal, hex (#H), octal (#Q), or
binary (#B).
·
VXI Interrupts: When bits 9, 10, or 11 are enabled and C-SCPI overlap mode is
on (or if using non-compiled SCPI), VXI card interrupts will be enabled. When
the event corresponding to bit 9, 10, or 11 occurs, the card will generate a VXI
interrupt.
·
Related Commands: *STB?, SPOLL, STAT:QUES:COND?,
STAT:QUES:EVENT?, STAT:QUES:ENABLE?
·
Cleared By: STAT:PRESet and power-on.
· *RST Condition: No change
Usage STAT:QUES:ENABLE 128 Set bit 7 in the Questionable Enable register
STATus:QUEStionable:ENABle?
STATus:QUEStionable:ENABle? returns the value of bits set in the Questionable
Enable register.
Comments
·
Returned Value: Decimal weighted sum of all set bits. The C-SCPI type is
uint16.
·
Related Commands: *STB?, SPOLL, STAT:QUES:COND?,
STAT:QUES:EVENT?, STAT:QUES:ENABLE
·
*RST Condition: No change
Usage STAT:QUES:ENABLE? Enter statement returns current value of bits
set in the Questionable Enable register
STATus:QUEStionable[:EVENt]?
STATus:QUEStionable[:EVENt]? returns the decimal weighted value of the bits
set in the Event register.
VT1419A Command Reference
STATus
Chapter 6 299
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com