Specifications

Usage STRAIN:EXC 4,(@100:107) set excitation voltage for channels 0 through 7
[SENSe:]STRain:EXCitation?
[SENSe:]STRain:EXCitation? (@<channel>) returns the excitation voltage value
currently set for the sense channel specified by <channel>.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel channel list (string) 100 - 163 none
Comments
·
Returned Value: Numeric value of excitation voltage. The C-SCPI type is flt32.
·
The <channel> parameter must specify a single channel only.
·
Related Commands: STRAIN:EXCitation
Usage STRAIN:EXC? (@107) query excitation voltage for channel 7
enter statement here returns the excitation voltage set by STR:EXC
[SENSe:]STRain:GFACtor
[SENSe:]STRain:GFACtor <gage_factor>,(@<ch_list>) specifies the gage factor
to be used to convert strain bridge readings for the channels specified by <ch_list>.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
gage_factor numeric (flt32) 1 - 5 none
ch_list channel list (string) 100 - 163 none
Comments
·
The <ch_list> parameter must specify the channel used to sense the bridge
voltage, not the channel position on a Bridge Completion SCP.
·
Related Commands: SENSE:STRAIN:GFAC?, SENSE:FUNC:STRAIN¼
·
*RST Condition: Gage factor is 2
Usage STRAIN:GFAC 3,(@100:107) set gage factor for channels 0 through 7
[SENSe:]STRain:GFACtor?
[SENSe:]STRain:GFACtor? (@<channel>) returns the gage factor currently set
for the sense channel specified by <channel>.
VT1419A Command Reference
[SENSe]
280 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com