Specifications

[SENSe:]CHANnel:SETTling?
[SENSe:]CHANnel:SETTling? <channel> returns the current number of samples
to make on <channel>.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel string 100 - 163 none
Comments
·
The <channel> parameter must specify a single channel.
·
Related Commands: SENS:CHAN:SETT, SAMP:TIMER?
·
*RST Condition: will return 1 for all channels.
·
Returned Value: returns numeric number of samples, The type is int16.
[SENSe:]DATA:CVTable?
[SENSe:]DATA:CVTable? (@<element_list>) returns from the Current Value
Table the most recent values stored by algorithms.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
element_list channel list 10 - 511 none
Comments
·
[SENSe:]DATA:CVTable? (@<element_list>) allows the latest values of internal
algorithm variables to be “viewed” while algorithms are executing.
·
The Current Value Table is an area in memory that can contain as many as 502
32-bit floating point values. Algorithms can copy any of their variable values into
these CVT elements while they execute. The algorithm statements to put data into
the CVT are:
writecvt( <expr>, <element_number> ) and
writeboth( <expr>, <element_number> ). See Chapters 3 and 4 for usage.
·
Elements 0 through 9 are not accessible. They are used internally by the DSP.
·
The format of values returned is set using the FORMat[:DATA] command
·
Returned Value: ASCII values are returned in the form ±1.234567E±123. For
example 13.325 volts would be +1.3325000E+001. Each value is followed by a
comma (,). A line feed (LF) and End-Or-Identify (EOI) follow the last value. The
C-SCPI data type is a string array.
REAL 32, REAL 64 and PACK 64, values are returned in the IEEE-488.2-1987
Definite Length Arbitrary Block Data format. This data return format is explained
VT1419A Command Reference
[SENSe]
260 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com