Specifications

·
When the VME memory card is enabled, the INIT command does not terminate
until data acquisition stops or VME memory is full.
·
Related Commands: Memory subsystem and FETCH?
·
*RST Condition: MEM:VME:STAT OFF
Usage MEMORY:VME:STATE ON enable VME card as reading storage
MEM:VME:STAT 0 Disable VME card as reading storage
MEMory:VME:STATe?
MEMory:VME:STATe? returned value of 0 indicates that VME reading storage is
disabled. Returned value of 1 indicates VME memory is enabled.
Comments
·
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
·
Returned Value: Numeric 1 or 0. C-SCPI type uint16.
·
Related Commands: MEMory subsystem and FETCH?
Usage MEM:VME:STAT? Returns 1 for enabled, 0 for disabled
VT1419A Command Reference
MEMory
244 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com