Specifications

MEMory:VME:ADDRess
MEMory:VME:ADDRess <A24_address> sets the A24 address of the VME
memory card to be used as additional reading storage.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
A24_address numeric valid A24 address none
Comments
·
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
·
The default (if MEM:VME:ADDR not executed) is 240000
16
.
·
The <A24_address> parameter may be specified in decimal, hex (#H), octal (#Q),
or binary (#B).
·
Related Commands: MEMory subsystem, FORMat and FETCH?
·
*RST Condition: VME memory address starts at 200000
16
. When using an
Agilent/HP E1405/6 command module, the first VT1419A occupies 200000
16
-
23FFFF
16
.
Usage MEM:VME:ADDR #H400000 Set the address for the VME memory card to be used
as reading storage
MEMory:VME:ADDRess?
MEMory:VME:ADDRess? returns the address specified for the VME memory
card used for reading storage.
Comments
·
Returned Value: numeric.
·
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
·
Related Commands: MEMory subsystem, FORMat and FETCH?
Usage MEM:VME:ADDR? Returns the address of the VME memory card.
MEMory:VME:SIZE
MEMory:VME:SIZE <mem_size> Specifies the number of bytes of VME
memory to allocate for additional reading storage.
VT1419A Command Reference
MEMory
242 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com