Specifications

·
Returned Value: Numeric value as set by the INP:GAIN command. The C-SCPI
type is float32.
·
When Accepted: Not while INITiated
·
Related Commands: INP:GAIN
·
*RST Condition: gain set to 1
Usage INPUT:GAIN? (@105) Check gain on channel 5
INP:GAIN? (@100) Check gain on channel 0
INPut:LOW
INPut:LOW <wvolt_type>,(@<ch_list>) controls the connection of input LO at a
Strain Bridge SCP channel specified by <ch_list>. LO can be connected to the
Wagner Voltage ground or left floating.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
wvolt_type discrete (string) FLOat | WVOLtage none
ch_list channel list (string) 132 - 163 none
Comments
·
Related Commands: INP:LOW?
·
*RST Condition: INP:LOW FLOAT (all VT1511A channels)
Usage INP:LOW WVOL (@132:139,148:155) connect LO of channels 32 through 39 and 48
through 55 to Wagner Ground.
INPut:LOW?
INPut:LOW? (@<channel>) returns the LO input configuration for the channel
specified by <channel>.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel channel list (string) 132 - 163 none
Comments
·
The <channel> parameter must specify a single channel only.
·
Returned Value: Returns FLO or WV. The C-SCPI type is string.
·
Related Commands: INP:LOW
VT1419A Command Reference
INPut
238 Chapter 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com